Specifications
Table Of Contents
- E6392-90042.pdf
- E6392-90042_manual
- Front Matter
- Contents
- 1 Preparing for Use
- 2 Programming Command Guidelines
- 3 Programming Command Reference
- IEEE Common Command
- CONFigure Subsystem
- DISPlay Subsystem
- HCOPy Subsystem
- RFGenerator Subsystem
- SMONitor Subsystem
- SYSTem Subsystem
- TESTs Subsystem for AUTOMATIC TEST
- All Tests Results
- All Tests Results
- Command Reference for Burst Timing/Power Ramp Measurement Screen
- Command Reference for DC Current Measurement Screen
- Command Reference for MS Information
- Command Reference for Peak TX Power Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Stand-by/Measuring Screens
- TESTs Subsystem for MANUAL TEST
- Command Reference for DC Current Measurement Screen
- Command Reference for Measuring Screens
- Command Reference for MS Information
- Command Reference for Peak TX Power /Burst Timing/Power Ramp Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Spectrum Monitor Measurement Screen
- Command Reference for Stand-by Screens
- TRIGger Subsystem
- 4 Programming Command Cross Reference
- 5 Example Programs
- A Syntax Diagram
- B Command Difference between E6392A & E6392B
- Index
196 Appendix B
Command Difference between E6392A & E6392B
Changed Commands
Network
Configuration:
Multiframes
CONFigure:NETWork:BSPa <int>
CONGigure:NETWrok:BSPa?
Multi Band
TESTs:MANual:MBANd OFF|DCS1800
[RFOR=GSM900/E-GSM]
TESTs:MANual:MBANd
OFF|GSM900|E-GSM [RFOR=DCS1800]
TESTs:MANual:MBANd?
Stand-by Screen
(Amplitude)
TESTs:MANual:AMPLitude <real>
TESTs:MANual:AMPLitude?
(Midamble
Selection)
TESTs:MANual:MIDamble NONE|TSC0
|TSC1|TSC2|TSC3|TSC4|TSC5|TSC6
|TSC7
TESTs:MANual:MIDamble?
(Timing
Advance)
TESTs:MANual:TADVance <int>
TESTs:MANual:TADVance?
(Slot
Configuration)
TESTs:MANual:SCONfigure 1×1|2×1
Measuring
Screen:
(BS Level)
TESTs:MANual:MEASure:AMPLitude
<real>
TESTs:MANual:MEASure:AMPLitude?
(GPRS End)
TESTs:MANual:MEASure:END
(Timing
Advance)
TESTs:MANual:MEASure:TADVance
<int>
TESTs:MANual:MEASure:TADVance?
(Slot
Configuration)
TESTs:MANual:MEASure:SCONfigure
1×1|2×1
Peak TX Power/
Burst Timing/
Power Ramp
Measurement
Screen
TESTs:MANual:TPOWer:AMPLitude
<real>
TESTs:MANual:TPOWer:AMPLitude?
TESTs:MANual:TPOWer:TADVance
<int>
TESTs:MANual:TPOWer:TADVance?
TESTs:MANual:TXAMplitude
:ACTAdvance?
Phase/ Frequency
Error Measurement
Screen
TESTs:MANual:PHASe:AMPLitude
<real>
TESTs:MANual:PHASe:AMPLitude?
TESTs:MANual:PHASe:TADVance
<int>
TESTs:MANual:PHASe:TADVance?
Spectrum Monitor
Measurement
Screen
TESTs:MANual:SMONitor:AMPLitude
<real>
TESTs:MANual:SMONitor:AMPLitude?