Specifications
Table Of Contents
- E6392-90042.pdf
- E6392-90042_manual
- Front Matter
- Contents
- 1 Preparing for Use
- 2 Programming Command Guidelines
- 3 Programming Command Reference
- IEEE Common Command
- CONFigure Subsystem
- DISPlay Subsystem
- HCOPy Subsystem
- RFGenerator Subsystem
- SMONitor Subsystem
- SYSTem Subsystem
- TESTs Subsystem for AUTOMATIC TEST
- All Tests Results
- All Tests Results
- Command Reference for Burst Timing/Power Ramp Measurement Screen
- Command Reference for DC Current Measurement Screen
- Command Reference for MS Information
- Command Reference for Peak TX Power Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Stand-by/Measuring Screens
- TESTs Subsystem for MANUAL TEST
- Command Reference for DC Current Measurement Screen
- Command Reference for Measuring Screens
- Command Reference for MS Information
- Command Reference for Peak TX Power /Burst Timing/Power Ramp Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Spectrum Monitor Measurement Screen
- Command Reference for Stand-by Screens
- TRIGger Subsystem
- 4 Programming Command Cross Reference
- 5 Example Programs
- A Syntax Diagram
- B Command Difference between E6392A & E6392B
- Index
188 Appendix B
Command Difference between E6392A & E6392B
Changed Commands
Softkey Memory SYSTem:MEMory
:CHANnel <int 1>,<int 2>
:CHANnel?
Softkey Memory SYSTem:MEMory
:PLEVel <int 1>,<int 2>
:PLEVel?
TESTs Subsystem for AUTOMATIC TEST
TESTs:AUTO:CONDition:LIMit
:BER <real h>
:BER?
TEST:AUTO to
CONF
CONFigure:CONDition:LIMit
:BER <real h>
:BER?
TESTs:AUTO:CONDition:LIMit
:BTIMing <real l>,<real h>
:BTIMing?
CONFigure:CONDition:LIMit
:BTIMing <real l>,<real h>
:BTIMing?
TESTs:AUTO:CONDition:LIMit
:CURRent:CAMP <int l>,<int h>
:CURRent:CAMP?
CONFigure:CONDition:LIMit
:CURRent:CAMP <int l>,<int h>
:CURRent:CAMP?
TESTs:AUTO:CONDition:LIMit
:CURRent:TALK <int l>,<int h>
:CURRent:TALK?
CONFigure:CONDition:LIMit
:CURRent:TALK <int l>,<int h>
:CURRent:TALK?
TESTs:AUTO:CONDition:LIMit
:FER <real h>
:FER?
CONFigure:CONDition:LIMit
:FER <real h>
:FER?
TESTs:AUTO:CONDition:LIMit
:FREQuency <int l>,<int h>
:FREQuency?
CONFigure:CONDition:LIMit
:FREQuency <int l>,<int h>
:FREQuency?
TESTs:AUTO:CONDition:LIMit
:LEVel <int l>,<int h>
:LEVel?
CONFigure:CONDition:LIMit
:LEVel <int l>,<int h>
:LEVel?
TESTs:AUTO:CONDition:LIMit
:PHASe:PEAK <real h>
:PHASe:PEAK?
CONFigure:CONDition:LIMit
:PHASe:PEAK <real h>
:PHASe:PEAK?
TESTs:AUTO:CONDition:LIMit
:PHASe:RMS <real h>
:PHASe:RMS?
CONFigure:CONDition:LIMit
:PHASe:RMS <real h>
:PHASe:RMS?
TESTs:AUTO:CONDition:LIMit
:QUALity <int l>,<int h>
:QUALity?
CONFigure:CONDition:LIMit
:QUALity <int l>,<int h>
:QUALity?
TESTs:AUTO:CONDition:LIMit
:TPOWer:HIGH <real l>,<real h>
:TPOWer:HIGH?
:TPOWer:MEDium <real l>,<real h>
:TPOWer:MEDium?
:TPOWer:LOW <real l>,<real h>
:TPOWer:LOW?
(PWR CNTL
instead of ranges)
CONFigure:CONDition:LIMit
:TPOWer <int>,<real l>,<real h>
:TPOWer?
(<int> for PWR CNTL)