Specifications
Table Of Contents
- E6392-90042.pdf
- E6392-90042_manual
- Front Matter
- Contents
- 1 Preparing for Use
- 2 Programming Command Guidelines
- 3 Programming Command Reference
- IEEE Common Command
- CONFigure Subsystem
- DISPlay Subsystem
- HCOPy Subsystem
- RFGenerator Subsystem
- SMONitor Subsystem
- SYSTem Subsystem
- TESTs Subsystem for AUTOMATIC TEST
- All Tests Results
- All Tests Results
- Command Reference for Burst Timing/Power Ramp Measurement Screen
- Command Reference for DC Current Measurement Screen
- Command Reference for MS Information
- Command Reference for Peak TX Power Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Stand-by/Measuring Screens
- TESTs Subsystem for MANUAL TEST
- Command Reference for DC Current Measurement Screen
- Command Reference for Measuring Screens
- Command Reference for MS Information
- Command Reference for Peak TX Power /Burst Timing/Power Ramp Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Spectrum Monitor Measurement Screen
- Command Reference for Stand-by Screens
- TRIGger Subsystem
- 4 Programming Command Cross Reference
- 5 Example Programs
- A Syntax Diagram
- B Command Difference between E6392A & E6392B
- Index
168 Appendix A
Syntax Diagrams
Figure A-5 DISPlay Subsystem (without any option)
Figure A-6 DISPlay Subsystem (with Option 002)
:DISPlay
<sy_disp1.vsd>
:
CONFigure
STBY
TPOWer
BTIMingAUTOmatic :
CURRent
PHASe
MANual
MEASure
PHASe
SENSitivity
CURRent:
SMONitor
STBY
TPOWer
SENSitivity
CONDition:
SEQuence
FILE
INITial
<sy_disp2.vsd>
:DISPlay :
CONFigure
STBY
TPOWer
BTIMingAUTOmatic :
CURRent
PHASe
MANual
MEASure
PHASe
SENSitivity
CURRent
:
SMONitor
TPOWer
SENSitivity
CONDition:
SEQuence
FILE
ASYNc
SYNC
: STBY
: STBY
RFGenerator
SMONitor
INITial