Specifications

Table Of Contents
Chapter 4 147
Programming Command Cross Reference
SIGNAL GENERATOR Screen
4. Programming Command
Cross Reference
SIGNAL GENERATOR Screen
NOTE This section is applicable only for GSM Test Sets with Option 002.
The following RFGenerator subsystem commands are used to configure the
functions and parameters for RF signal generation.
Table 4-18 RFGenerator Subsystem Command Cross Reference
Item Command
DC Power Mode RFGenerator:DCPower:MODE ON|OFF|1|0
RFGenerator:DCPower:MODE?
DC Power Voltage RFGenerator:DCPower:VOLT <real>
RFGenerator:DCPower:VOLT?
Level RFGenerator:AMPLitude <real>
RFGenerator:AMPLitude?
Modulation Function RFGenerator:MODulation OFF|PN9|ALL_0
RFGenerator:MODulation?
Radio Standard RFGenerator:RFORmat GSM900|E-GSM|DCS1800|PCS1900
RFGenerator:RFORmat?
RF Signal Output RFGenerator:RFOUtput ON|OFF|1|0
RFGenerator:RFOUtput?
Traffic Channel RFGenerator:CHANnel <int>
RFGenerator:CHANnel?
Traffic Channel
Frequency
RFGenerator:FREQuency <real>
RFGenerator:FREQuency?