Specifications
Table Of Contents
- E6392-90042.pdf
- E6392-90042_manual
- Front Matter
- Contents
- 1 Preparing for Use
- 2 Programming Command Guidelines
- 3 Programming Command Reference
- IEEE Common Command
- CONFigure Subsystem
- DISPlay Subsystem
- HCOPy Subsystem
- RFGenerator Subsystem
- SMONitor Subsystem
- SYSTem Subsystem
- TESTs Subsystem for AUTOMATIC TEST
- All Tests Results
- All Tests Results
- Command Reference for Burst Timing/Power Ramp Measurement Screen
- Command Reference for DC Current Measurement Screen
- Command Reference for MS Information
- Command Reference for Peak TX Power Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Stand-by/Measuring Screens
- TESTs Subsystem for MANUAL TEST
- Command Reference for DC Current Measurement Screen
- Command Reference for Measuring Screens
- Command Reference for MS Information
- Command Reference for Peak TX Power /Burst Timing/Power Ramp Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Spectrum Monitor Measurement Screen
- Command Reference for Stand-by Screens
- TRIGger Subsystem
- 4 Programming Command Cross Reference
- 5 Example Programs
- A Syntax Diagram
- B Command Difference between E6392A & E6392B
- Index
Chapter 4 141
Programming Command Cross Reference
MANUAL TEST Screens
4. Programming Command
Cross Reference
MS Information Screen
The following MSINformation commands are used to get information on the
mobile under test. For Test Sets with Option 002, if set to ASYNC, these
commands are invalid. For Test Sets with Option 040, if set to GPRS, only the
query for Power Class Information is valid.
Table 4-12 MSINformation Command Cross Reference
Item Command
IMSI Information
a
TESTs:MANual:RESults:MSINformation:IMSI?
IMEI Information
a
TESTs:MANual:RESults:MSINformation:IMEI?
Dialed # Information
a
TESTs:MANual:RESults:MSINformation:DIAL?
Power Class Information TESTs:MANual:RESults:MSINformation:PCLass?
GSM Version Information
a
TESTs:MANual:RESults:MSINformation:GVERsion?
a. Invalid when the GPRS mode is selected on the Test Set with Option 040.