Specifications
Table Of Contents
- E6392-90042.pdf
- E6392-90042_manual
- Front Matter
- Contents
- 1 Preparing for Use
- 2 Programming Command Guidelines
- 3 Programming Command Reference
- IEEE Common Command
- CONFigure Subsystem
- DISPlay Subsystem
- HCOPy Subsystem
- RFGenerator Subsystem
- SMONitor Subsystem
- SYSTem Subsystem
- TESTs Subsystem for AUTOMATIC TEST
- All Tests Results
- All Tests Results
- Command Reference for Burst Timing/Power Ramp Measurement Screen
- Command Reference for DC Current Measurement Screen
- Command Reference for MS Information
- Command Reference for Peak TX Power Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Stand-by/Measuring Screens
- TESTs Subsystem for MANUAL TEST
- Command Reference for DC Current Measurement Screen
- Command Reference for Measuring Screens
- Command Reference for MS Information
- Command Reference for Peak TX Power /Burst Timing/Power Ramp Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Spectrum Monitor Measurement Screen
- Command Reference for Stand-by Screens
- TRIGger Subsystem
- 4 Programming Command Cross Reference
- 5 Example Programs
- A Syntax Diagram
- B Command Difference between E6392A & E6392B
- Index
Chapter 4 133
Programming Command Cross Reference
CONFIGURATION Screen
4. Programming Command
Cross Reference
RX Level Test CONFigure:SEQuence:LEVel <int>
CONFigure:SEQuence:LEVel?
RX Quality Test CONFigure:SEQuence:QUALity <int>
CONFigure:SEQuence:QUALity?
Second Call CONFigure:SEQuence:SIGNaling:CALL2 ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:CALL2?
Sensitivity Test CONFigure:SEQuence:SENSitivity <int>
CONFigure:SEQuence:SENSitivity?
Talk Test CONFigure:SEQuence:SIGNaling:TALK ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:TALK?
Talk Test
TCH Channel
CONFigure:SEQuence:TCH:CHANnel <int>
CONFigure:SEQuence:TCH:CHANnel?
Talk Test
TCH Frequency
CONFigure:SEQuence:TCH:FREQuency <real>
CONFigure:SEQuence:TCH:FREQuency?
Item Command