Specifications
Table Of Contents
- E6392-90042.pdf
- E6392-90042_manual
- Front Matter
- Contents
- 1 Preparing for Use
- 2 Programming Command Guidelines
- 3 Programming Command Reference
- IEEE Common Command
- CONFigure Subsystem
- DISPlay Subsystem
- HCOPy Subsystem
- RFGenerator Subsystem
- SMONitor Subsystem
- SYSTem Subsystem
- TESTs Subsystem for AUTOMATIC TEST
- All Tests Results
- All Tests Results
- Command Reference for Burst Timing/Power Ramp Measurement Screen
- Command Reference for DC Current Measurement Screen
- Command Reference for MS Information
- Command Reference for Peak TX Power Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Stand-by/Measuring Screens
- TESTs Subsystem for MANUAL TEST
- Command Reference for DC Current Measurement Screen
- Command Reference for Measuring Screens
- Command Reference for MS Information
- Command Reference for Peak TX Power /Burst Timing/Power Ramp Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Spectrum Monitor Measurement Screen
- Command Reference for Stand-by Screens
- TRIGger Subsystem
- 4 Programming Command Cross Reference
- 5 Example Programs
- A Syntax Diagram
- B Command Difference between E6392A & E6392B
- Index
Chapter 4 129
Programming Command Cross Reference
CONFIGURATION Screen
4. Programming Command
Cross Reference
Test Setup: Test Condition Screen
The following CONDition commands are used to set the controls and parameters
associated with the Test Setup: Test Condition screen.
Table 4-5 CONDition Command Cross Reference
Item Command
Averaging Function CONFigure:CONDition:AVERage OFF|<int>
CONFigure:CONDition:AVERage?
BER BS Level CONFigure:CONDition:SENSitivity:LEVel <real>
CONFigure:CONDition:SENSitivity:LEVel?
BER Frames CONFigure:CONDition:SENSitivity:FRAMe <int>
CONFigure:CONDition:SENSitivity:FRAMe?
BER Limit CONFigure:CONDition:LIMit:BER <real h>
CONFigure:CONDition:LIMit:BER?
BLER Limit
a
CONFigure:CONDition:LIMit:BLER <real h>
CONFigure:CONDition:LIMit:BLER?
BS Level CONFigure:CONDition:AMPLitude <real>
CONFigure:CONDition:AMPLitude?
Burst Timing Limit CONFigure:CONDition:LIMit:BTIMing <real l>,<real h>
CONFigure:CONDition:LIMit:BTIMing?
DC Current Camp On
Limit
CONFigure:CONDition:LIMit:CURRent:CAMP <int l>,<int h>
CONFigure:CONDition:LIMit:CURRent:CAMP?
DC Current Talk Limit CONFigure:CONDition:LIMit:CURRent:TALK <int l>,<int h>
CONFigure:CONDition:LIMit:CURRent:TALK?
FER Limit CONFigure:CONDition:LIMit:FER <real h>
CONFigure:CONDition:LIMit:FER?
Frequency Error Limit CONFigure:CONDition:LIMit:FREQuency <int l>,<int h>
CONFigure:CONDition:LIMit:FREQuency?
Loopback Delay CONFigure:CONDition:LDELay SHORT|MID|LONG
CONFigure:CONDition:LDELay?
MS Power Class CONFigure:CONDition:PCLass <int>
CONFigure:CONDition:PCLass?
Peak TX Power Limit CONFigure:CONDition:LIMit:TPOWer <int>,<real l>,<real h>
CONFigure:CONDition:LIMit:TPOWer?
Phase Error Limit CONFigure:CONDition:LIMit:PHASe:PEAK <real h>
CONFigure:CONDition:LIMit:PHASe:PEAK?
CONFigure:CONDition:LIMit:PHASe:RMS <real h>
CONFigure:CONDition:LIMit:PHASe:RMS?