Specifications
Table Of Contents
- E6392-90042.pdf
- E6392-90042_manual
- Front Matter
- Contents
- 1 Preparing for Use
- 2 Programming Command Guidelines
- 3 Programming Command Reference
- IEEE Common Command
- CONFigure Subsystem
- DISPlay Subsystem
- HCOPy Subsystem
- RFGenerator Subsystem
- SMONitor Subsystem
- SYSTem Subsystem
- TESTs Subsystem for AUTOMATIC TEST
- All Tests Results
- All Tests Results
- Command Reference for Burst Timing/Power Ramp Measurement Screen
- Command Reference for DC Current Measurement Screen
- Command Reference for MS Information
- Command Reference for Peak TX Power Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Stand-by/Measuring Screens
- TESTs Subsystem for MANUAL TEST
- Command Reference for DC Current Measurement Screen
- Command Reference for Measuring Screens
- Command Reference for MS Information
- Command Reference for Peak TX Power /Burst Timing/Power Ramp Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Spectrum Monitor Measurement Screen
- Command Reference for Stand-by Screens
- TRIGger Subsystem
- 4 Programming Command Cross Reference
- 5 Example Programs
- A Syntax Diagram
- B Command Difference between E6392A & E6392B
- Index
Chapter 4 123
Programming Command Cross Reference
AUTOMATIC TEST Screens
4. Programming Command
Cross Reference
Multi Band TESTs:AUTO:MBANd OFF|DCS1800 [RFOR=GSM900/E-GSM]
TESTs:AUTO:MBANd OFF|GSM900|E-GSM [RFOR=DCS1800]
TESTs:AUTO:MBANd?
Radio Standard TESTs:AUTO:RFORmat GSM900|E-GSM|DCS1800|PCS1900
TESTs:AUTO:RFORmat?
Screen Mode TESTs:AUTO:SCReen SIMPlified|DETailed
Signaling State TESTs:AUTO:MEASure:SIGNaling:STATe?
Talk Test Result TESTs:AUTO:MEASure:TALK PASS|FAIL
Talk Test TCH TESTs:AUTO:TCH <int>
TESTs:AUTO:TCH?
Item Command