Specifications
Table Of Contents
- E6392-90042.pdf
- E6392-90042_manual
- Front Matter
- Contents
- 1 Preparing for Use
- 2 Programming Command Guidelines
- 3 Programming Command Reference
- IEEE Common Command
- CONFigure Subsystem
- DISPlay Subsystem
- HCOPy Subsystem
- RFGenerator Subsystem
- SMONitor Subsystem
- SYSTem Subsystem
- TESTs Subsystem for AUTOMATIC TEST
- All Tests Results
- All Tests Results
- Command Reference for Burst Timing/Power Ramp Measurement Screen
- Command Reference for DC Current Measurement Screen
- Command Reference for MS Information
- Command Reference for Peak TX Power Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Stand-by/Measuring Screens
- TESTs Subsystem for MANUAL TEST
- Command Reference for DC Current Measurement Screen
- Command Reference for Measuring Screens
- Command Reference for MS Information
- Command Reference for Peak TX Power /Burst Timing/Power Ramp Measurement Screen
- Command Reference for Phase/Frequency Error Measurement Screen
- Command Reference for Sensitivity/RX Quality/RX Level Measurement Screen
- Command Reference for Spectrum Monitor Measurement Screen
- Command Reference for Stand-by Screens
- TRIGger Subsystem
- 4 Programming Command Cross Reference
- 5 Example Programs
- A Syntax Diagram
- B Command Difference between E6392A & E6392B
- Index
122 Chapter 4
Programming Command Cross Reference
AUTOMATIC TEST Screens
AUTOMATIC TEST Screens
Stand-by/Measuring Screens
The following commands are used to set the controls and parameters associated
with the Stand-by and Measuring screens.
Table 4-1 Command Cross Reference for Stand-by/Measuring Screens
Item Command
6 Measurement DCP
Variable
TESTs:AUTO:VARiable:DCP:VOLT1 <real>
TESTs:AUTO:VARiable:DCP:VOLT1?
TESTs:AUTO:VARiable:DCP:VOLT2 <real>
TESTs:AUTO:VARiable:DCP:VOLT2?
TESTs:AUTO:VARiable:DCP:VOLT3 <real>
TESTs:AUTO:VARiable:DCP:VOLT3?
TESTs:AUTO:VARiable:DCP:VOLT4 <real>
TESTs:AUTO:VARiable:DCP:VOLT4?
TESTs:AUTO:VARiable:DCP:VOLT5 <real>
TESTs:AUTO:VARiable:DCP:VOLT5?
TESTs:AUTO:VARiable:DCP:VOLT6 <real>
TESTs:AUTO:VARiable:DCP:VOLT6?
6 Measurement TCH
Variable
TESTs:AUTO:VARiable:TCH:CHANnel1 <int>
TESTs:AUTO:VARiable:TCH:CHANnel1?
TESTs:AUTO:VARiable:TCH:CHANnel2 <int>
TESTs:AUTO:VARiable:TCH:CHANnel2?
TESTs:AUTO:VARiable:TCH:CHANnel3 <int>
TESTs:AUTO:VARiable:TCH:CHANnel3?
TESTs:AUTO:VARiable:TCH:CHANnel4 <int>
TESTs:AUTO:VARiable:TCH:CHANnel4?
TESTs:AUTO:VARiable:TCH:CHANnel5 <int>
TESTs:AUTO:VARiable:TCH:CHANnel5?
TESTs:AUTO:VARiable:TCH:CHANnel6 <int>
TESTs:AUTO:VARiable:TCH:CHANnel6?
BCCH TESTs:AUTO:BCCH <int>
TESTs:AUTO:BCCH?
DC Power Mode TESTs:AUTO:DCPower:MODE AUTO|ON|OFF
TESTs:AUTO:DCPower:MODE?
DC Power Voltage TESTs:AUTO:DCPower:VOLT <real>
TESTs:AUTO:DCPower:VOLT?