Technical data

4-8 E6198B Switch/Load Unit Software Manual
4 Programming With Generic Application Handler
Valid range: 1-21
channel
See Table 4-4, “Valid Range For The “Channel” Parameters,” on
page 3.
openClose
Valid range: 0 - Off, 1 - On
status
Return value. Call returns 0 in case of success.
Remarks
This function returns the status information of the power
contact of the specified load card channel. This information is
not an actual read back from the load card, it’s the status
information cached within the driver.
SetCurrentSense
void SetCurrentSense (long boxNr, long slotNr, long channel, long *status)
Parameters
boxNr
Valid range: 0-7
slotNr
Valid range: 1-21
channel
See Table 4-4, “Valid Range For The “Channel” Parameters,” on
page 3.
Note:
• Only one sense-channel in the system can be set at a time - so
after the current measurement the actuated sense relays
must be “unlocked” by calling the routine with the channel
paramter set to 0.
• The E6176A is a special model which shares oen sense
resistor for two adjacent load channels. (see E6198B Switch
Load Unit User’s Manual.pdf)
status
Return value. Call returns 0 in case of success.