Specifications

4-46 TS-8900 Functional Test System Diagnostics User Guide

4 Diagnostic Testing Details

N9377A 16 Channel Load Card LC16CH_7 Tests

• Display instruction to Install load module E2240-67012 on

LC16CH_7 Load Card.

• Display instruction to install CEDGN Board #1 on TC1 and CEDGN

Board #4 on appropriate TC. Install Cable E6170-61607 from SLU

Utility Connector to J2 of Board #4. Install Cable E6170-61607 from

J1 of Board #1 to J1 of Board #4.

• Setup DMM to perform 2W resistance measurement.

• Measure LC16CH_7 load card loopback path resistance from

CH1-CH2 via Loadx.1 until CH7-CH8 via Loadx.1 using Row1 and

Row8

CH9-CH10 via Loadx.1 until CH15-CH16 via Loadx.1 using Row2 and

Row7

• Measure LC16CH_7 load card sense resistor path:

CH1 Current Sense until CH16 Current Sense via Row25 and

Row26.

N9377A 16 Channel Load Card LC16CH_8 Tests