Specifications

Safety and Regulatory Information 2
TS-8900 Functional Test System Diagnostics User Guide 2-3
Environmental Conditions
The TS-8900 Functional Test System is designed for indoor use
only. Table 2-1 shows general environmental requirements.
Before Applying Power
Verify that the product is set to match the available line voltage
and all safety precautions are taken. Note the external markings
of the instruments described in
“Safety Symbols and Regulatory
Markings
”.
WARNING
DO NOT REMOVE RACK PANELS OR INSTRUMENT COVERS. Operating
personnel must not remove any rack panels or instrument covers.
Component replacement and internal adjustments must be made only
by qualified service personnel. Products that appear damaged or
defective should be made inoperative and secured against unintended
operation until they can be repaired by a qualified service personnel.
WARNING
The protection provided by the TS-8900 system may be impaired if
the system is used in a manner not specified by Agilent.
Table 2-1 Environment Requirements
Environment Conditions Requirements
Maximum Altitude 2000 meters
Temperature (Operation) 5 C to 40 C
Maximum Relative Humidity The test system is designed to operate
in the range from 5% to 80% relative
humidity (non-condensing).
°
°
CAUTION
This product is designed for use in Installation Category II and
Pollution Degree 2, per IEC 61010-1 and 664 respectively.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com