Manualshelf

Specifications

ManualsBrandsAgilent Technologies ManualsComputer equipmentE6198B
919293949596979899100
Action Summary 97Chapter 5
Table 5-6. DMM Actions
E1411/34401 DMM
Low-Level Actions
dmmConfCal Configures the 50/60Hz line frequency and enables/disables autozero of
the Agilent E1411 DMM.
dmmConfFunction Sets the function, range and resolution of the Agilent E1411 or Agilent
34401 DMM.
dmmConfSample Selects the sample source, sample count, and sample period of the Agilent
E1411 DMM.
dmmConfSimple Selects one of three measurement types on the Agilent E1411 or Agilent
34401 DMM for easy configuration.
dmmConfTrigIn Selects the trigger input parameters of the Agilent E1411 or Agilent 34401
DMM.
dmmConfTrigOut Enables you to route the Agilent E1411 DMM's "voltmeter complete" signal
to the VXIbus TTL trigger lines.
dmmGetMultipleResults Returns multiple readings from the DMM.
dmmGetResults Returns the readings from the Agilent E1411 or Agilent 34401 DMM.
dmmInitiate Initiates a reading cycle on the Agilent E1411 or Agilent 34401 DMM.
dmmIsSet Waits until the Agilent E1411 or Agilent 34401 DMM is ready for
measurement.
dmmReset Resets the Agilent E1411 or Agilent 34401 DMM to its power-on state.
DmmSelfTest Runs a selftest on the Agilent E1411 or Agilent 34401 Digital Multimeter
(DMM) that is provided by its Plug&Play driver.
dmmSet Sends current setup information to the Agilent E1411 or Agilent 34401
DMM.
dmmSetTimeout Sets the Agilent E1411 orAgilent 34401 DMM operation time out value (in
milliseconds).
dmmVerifyTerminalSwitch Checks the state of the front/rear terminal switch on an Agilent 34401A
DMM and compares the current switch state with the value in the
parameter block.
E1411/34401 DMM
High-Level Actions
dmmMeasureACI Measures AC current using the Agilent 34401 DMM, only.
dmmMeasureACV Measures AC voltage using the Agilent E1411 or Agilent 34401 DMM.
dmmMeasureCurrent Measures voltage across a user supplied shunt or sense resistor to
calculate current using the Agilent E1411 or Agilent 34401 DMM.
dmmMeasureDCI Measures DC Current using the Agilent 34401 DMM, only.
dmmMeasureDCV Measures DC voltage using the Agilent E1411 or Agilent 34401 DMM.
dmmMeasureFrequency Measures frequency using the Agilent 34401 DMM, only.
dmmMeasureOhms Measures resistance using the Agilent E1411 or Agilent 34401 DMM.
dmmMeasurePeriod Measures period using the Agilent 34401 DMM, only.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com