Specifications

Action Summary 95Chapter 5
ADCLastReading Transfers the current digitizer data from the E1563, E1564, or E1429 from
memory into a waveform data type to allow easy viewing.
ADCReset Resets the digitizer (ADC) to its power-on state for all channels.
ADCSelfTest Runs a selftest on the Agilent E1429 Digitizer (ADC) that is provided by its
Plug and Play driver.
ADCSetReturnMode This action allows time-outs on the specified E1563, E1564 or E1429
Digitizer (ADC) to raise an exception when encountered.
ADCSetTimeout Sets the E1563, E1564 or E1429 Digitizer (ADC) operation time out value
(in milliseconds).
ADCSetTimeoutException This action allows enabling/disabling exception response to a timeout on
the specified E1563, E1564 or E1429 digitizer (ADC).
ADCStart Arms the Agilent E1429 Digitizer (ADC) for the configured trigger event and
returns.
ADCType Returns the type of digitizer (ADC) installed: either E1429, E1563, or
E1564.
digitalReadCC Reads a value from the custom card digital input used in the Agilent E6198
switch/load unit.
digitalReadRegCC Reads a value from the specified E8794A custom card digital input register.
digitalReadSU Reads a value from the Agilent E6198 switch/load unit digital input ports.
digitalResetCC Perform a soft reset on the Agilent E8794 custom card.
digitalWriteCC Write a value to the Custom Card open collector digital output port used in
the Agilent E6198 switch/load unit.
DigitalWriteQuery Returns the current output state of the TS-5430 digital output ports.
digitalWriteQueryCC Returns the current output state of the custom card open collector digital
output port used in the Agilent E6198 switch/load unit.
digitalWriteQuerySU Returns the current output state of the Agilent E6198 switch/load unit digital
output ports.
digitalWriteRegCC Write a value to the specified Agilent E8794A Custom Card digital output
register.
digitalWriteRegQueryCC Returns the last value written to the specified register on the Agilent
Technologies E8794A custom card .
digitalWriteSU Write a value to the Agilent E6198 switch/load unit digital output ports.
High-Level Actions
ADC_Analyze_Wave Measures a waveform using the E1563, E1564, or 1429 Digitizer to
analyze it for Vmin, Vmax, High pulsewidth, Low pulsewidth and period
values.
ADC_Config_1_Chan Configures E1563, E1564, or E1429 for capturing a waveform for later
analysis on Channel 1.
ADC_DCV Returns instantaneous DC voltage from the Agilent Technologies E1563,
E1564, or E1429 Digitizer using the "offset" parameter time from the trigger
point.
Table 5-5. digitizer Actions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com