Specifications

92 Action Summary Chapter 5
ctrMeasurePeriod An Agilent E1333 Counter action that measures period.
ctrMeasurePulseWidth An Agilent E1333 Counter action that measures pulse widths.
ctrMeasureRatio High level Agilent E1333 Counter Action to measure Ratio using the
counter.
ctrMeasureTimeInterval High level Agilent E1333 Counter action that measures time interval.
ctrMeasureTotalize High level Agilent E1333 Counter action that starts a totalize measurement.
Table 5-2. counter Actions
Table 5-3. dac (D/A Converter) Actions
dacConfSourceDCI Configures the Agilent E1418 DAC to output the specified current (Agilent
E1418 only).
dacConfSourceDCV Configures the Agilent E1418 DAC to output the specified voltage (Agilent
E1418 only).
dacConfTrigIn Selects the Agilent E1418 DAC's trigger source (Agilent E1418 only) for all
channels.
dacConnect Immediately connects the output relays on the selected Agilen E1418 DAC
(Agilent E1418 only).
dacDisconnect Immediately disconnects the output relays on the selected Agilent E1418
DAC (Agilent E1418 only).
dacIsSet Waits until the Agilent E1418/E1328 DAC is ready for output.
dacReset Resets all channels of the Agilent E1418/E1328 DAC to the power-on state
(0V output) and disconnects the output relay.
dacSelftest Runs selftest on the Agilent E1418/E1328 DAC; returns a pass/fail
indication.
dacSet Sends current setup information to the Agilent E1418 DAC (Agilent E1418
only).
dacSetDCI Sets the Agilent E1418/E1328 DAC to output the specified current; causes
an immediate output.
dacSetDCV Sets the Agilent E1418/E1328 DAC to output the specified voltage; causes
an immediate output.
dacSetDCVSU Program a DAC channel on the Agilent E6198 switch/load unit to a desired
voltage.
dacSetGainOffsetSU Change the gain/offset values used to set the DAC voltage in the
switch/load unit.
dacSetGainSU Change the gain value used to set the DAC voltage in the switch/load unit.
dacSetOffsetSU Change the offset value used to set the DAC voltage in the switch/load unit.
dacSetPSVSU Program a DAC channel voltage on the Agilent E6198 switch unit using the
gain value in the module parameter block.
dacSetTimeout Sets the Agilent E1328 or E1418 Digital to Analog Converter (DAC)
operation time out value (in milliseconds).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com