Specifications

Action Summary 91Chapter 5
Arb_Dl_Waveform_Data Downloads a waveform data type to the Agilent E6173 Arbitrary
Waveform Generator (Arb).
Arb_Download Not recommended for use in new testplans (use
"Arb_Dl_Std_Waveform" or "Arb_Dl_Ext_Waveform").
Arb_Download_Deluxe Not recommended for use in new testplans (Use
"Arb_Dl_Ext_Waveform" or "Arb_Dl_Custom_Waveform").
Arb_Download_Waveform Not recommended for use in new testplans (use
"Arb_Dl_Waveform_Data").
Arb_Enable_Download Not recommended for use in new testplans.
Arb_Output_Std_Waveform Configures Agilent E6173 Arb to generate a sine, pulse, or triangle
waveform of specified frequency, amplitude, and offset.
Arb_Select_Synced_Waveforms Not recommended for use in new testplans (Use
"Arb_Select_Synced_Waves_By_Name").
Arb_Select_Synced_Waves_By_Name Allows selection of Agilent E6173 Arb waveforms (on the fly) of both
channels referenced by name assigned in the "Arb_Dl_xxx" actions.
Arb_Select_Wave_By_Name Allows the selection of Agilent E6173 Arb waveforms (on the fly)
referenced by name assigned in the "Arb_Dl_xxx" actions.
Arb_Select_Waveform Not recommended for use in new testplans (Use
"Arb_Select_Wave_By_Name").
Arb_Source_MDA High-Level Action: Programs the arb to act as the MDA source.
CreateArbWaveform This program uses the arbitrary waveform function to create an array
that defines a square wave pulse with a calculated rise time and fall
time. The waveform consists of 4000 points.
Table 5-1. arb (Arbitrary Waveform Generator) Actions
Table 5-2. counter Actions
Low-Level Actions
ctrConfFunction Selects function, range, and resolution of the Agilent E1333 Counter.
ctrConfInControls Configures the input circuit of the Agilent E1333 Counter.
ctrConfTrigIn Sets the input trigger of the Agilent E1333 Counter.
ctrGetResults Reads the Agilent E1333 Counter results.
ctrInitiate Starts the previously configured Agilent E1333 Counter measurement.
ctrIsSet Waits until the Agilent E1333 Counter is ready for measurement.
ctrReset Resets all of the Agilent E1333 Counter's channels to the power-on state.
CtrSelfTest Runs a selftest on the Agilent E1333 Universal Counter that is provided by
its Plug and Play driver.
ctrSetReturnMode This action allows time-outs on the specified Agilent E1333 Universal
Counter to raise an exception when encountered.
ctrSetTimeout Sets the Agilent E1333 Counter operation time out value (in milliseconds).
High-Level Actions
ctrMeasureFrequency An Agilent E1333 Counter action that measures frequency.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com