Specifications

Using the DMM and ARB 85Chapter 4
Figure 4-15. Reference a Symbol in the “Arb_Dl_Waveform_Data” Action
1. Click on action name to select the “Arb_Dl_Waveform_Data” action
2. Click on “Reference a Symbol”
menu item
3. The program automatically selects a symbol. If only one symbol is stored, it selects that symbol. If more than one
symbol is stores, you must select the symbol, as shown in steps D to F
4. Click on parameter value to select the parameter
5. Click on the arrow to select the symbol (you can also click on
6. Click on the appropriate symbol name
the three dots to select it, but a different procedure is used)
to select it
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com