Specifications

Using the DMM and ARB 75Chapter 4
Arb_Select_Wave_By_Name Selects and outputs the waveform using the name entered in the
‘waveform_name’ parameter (i.e., “wave1”) This is the same name as the
name in the ‘waveform_name’ parameter of the “Arb_Dl_Waveform_Data”
action.
DialogOkay This optional action is used here to view waveform.
Test Group/Test/Action Name Description
Figure 4-5. Generating a Data Type Waveform
Parameter Name
Parameter Type
Click on “View Waveform” to view resultant waveform (see next figure)
Click on “Range” to add time values
Click on “Amplitude” to see amplitude data
Amplitude data
“Start” and “Stop” times of the
waveform (Stop - Start = Total
Time e.g. 0.001-0.00 = 1 mS or
1 kHz); this results in a segment
time of 47.62 µS
The number of points or segments
on the waveform
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com