Specifications

40 How to Use the System Software Chapter 2
Agilent 6642A, 6643A,
6652A, 6653A, 6673A
Power Supplies
Power Supply Debug Front Panel shows the dialog box for controlling the
Agilent 6642A, 6643A, 6653A, 6673A Power Supplies. You can specify the
output voltage or current for each channel of the Power Supply. You must
specify a protection voltage greater than the voltage setting.
The debug panel boxes and buttons do the following:
Voltage/Current:
Specifies the output voltage or current for each channel of the power
supplies. The ‘Type’ selection sets the voltage or current mode.
Dependent on the type selected, enter the voltage value or current
value into the Voltage or Current field, respectively.
Update Output:
This button changes the power supply output.
Close:
This button closes the debug panel.
System Interface
The setting of the counter function uses the following action routines:
psConfVI, psSet, psIsSet, psConnect, psDisconnect
Figure 2-19. Power Supply Debug Front Panel
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com