Specifications

How to Use the System Software 37Chapter 2
Agilent E6171B
Measurement Control
Module
Agilent E6171B Measurement Control Module Debug Front Panel shows
the dialog box for controlling the Agilent E6171B Measurement Control
Module.
The debug panel boxes and buttons do the following:
Voltage or Current:
You have the option to specify the output voltage or current for each
channel of the MCM. The ‘Type’ selection sets the voltage or current
mode.
Dependent on the type selected, enter the voltage value or current
value into the Voltage or Current field, respectively.
Expected Current (when enabled by the Type-Current):
Defines the expected current of the MCM (or VI, i.e.,
Voltage/Current) source.
Update Output:
This button changes the output source of the MCM.
Close:
This button closes the debug panel.
System Interface
The setting of the counter function will use the following action routines:
viSetSourceDCI, viSetSourceDCV, viSet
Figure 2-16. Agilent E6171B Measurement Control Module Debug Front
Panel
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com