Specifications

36 How to Use the System Software Chapter 2
Waveform Display:
The digitizer can generate either a single waveform display or a
continuous update of waveforms, dependent on the selection of the
“Single” and “Continuous” buttons. The display updates at a rate of
>10 update/sec.
Close:
This button closes the debug panel.
System Interface
The setting of the digitizer function will use the following action
routines:adcConfArm, dcConfFreq, adcConfInControls, adcIsSet,
adcGetResults
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com