Specifications

How to Use the System Software 33Chapter 2
Agilent E1333A Counter Agilent E1333 Counter Debug Front Panel shows the dialog box for Agilent
E1333A Counter. Only the UUT connection screen is shown. The custom
path selection is the same used by the Digital Multimeter (see Figure 2-12
on page 30).
The debug panel boxes and buttons do the following:
Function:
Choose Frequency, Period, Positive Pulse Width, Negative Pulse
Width, Totalize
Input, Coupling, Input Impedance:
Allows you to set input functions. The setting of each function is sent
before a measurement is made.
Switching Path:
The counter panel supports the selection of a switching path. The
counter switches only the high connections of the output. The low
connections are automatically connected to system ground.
Measurement Results:
Select the “Single” button to initiate a single measurement or the
“Continuous” button to initiate a series of measurements. The
continuous button is changed to a “Stop” button, once pressed.
Figure 2-14. Agilent E1333 Counter Debug Front Panel
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com