Specifications

32 How to Use the System Software Chapter 2
Agilent E1328A &
E1418A Digital to Analog
Converter
Agilent E1328A and E1418A DAC Debug Front Panel shows the dialog box
for controlling the Agilent E1328/E1418 Digital-to-Analog Converter
(DAC) Module.
The debug panel boxes and buttons do the following:
Voltage or Current:
You have the option to specify the output voltage or current for each
channel of the DAC. The ‘Type’ selection sets the voltage or current
mode and defines contents of the input field.
Dependent on the type selected, enter the voltage value/current value
into the Voltage/Current field.
(Note the E1328A cannot programmatically select the voltage or
current option.)
Update Output:
This button changes the output setting.
Close:
This button closes the debug panel.
System Interface
The setting of the DAC uses the following action routine:
dac16i_setup
Figure 2-13. Agilent E1328A and E1418A DAC Debug Front Panel
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com