Specifications

How to Use the System Software 23Chapter 2
Using Software Debug Features
This section describes specific software features, unique to the Agilent
TestExec SL version 2.0 and later, that you will find helpful in creating and
debugging your tests and testplans. To enable Agilent TestExec SL, use the
procedure in “Selecting Agilent TestExec SL” on page 17, if not enabled.
Looping The loop constructs are FOR / NEXT sequencer statements. For example, a
testplan developer would stop a testplan (if one is running), add
FOR and
NEXT lines to the testplan and then restart the testplan from the beginning.
Refer to the Agilent TestExec SL documentation for additional information.
Figure 2-5 shows how to select and insert the looping statements into a
testplan.
Figure 2-5. Selecting Looping and Other Statements
1. Click on “Insert” Menu
2. Click on “Other Statements” menu item
3. Click on looping
or other statement
4. Statement has been added; make any necessary changes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com