Specifications

22 How to Use the System Software Chapter 2
Figure 2-4. Adding a Switching Action
6. Select the place to add the switching action
8. Click on the “Value” field to view button with the three dots (. . .)
7. Click on “Insert Switching”
9. Click on the three dots
10. Click on arrow to view “Node Names”, then click on name to select it
11. Click on “OK” to
12. Repeat steps
select the node; use
the same procedure
for the “Ends At”
nodes
8 to 11 to add
other nodes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com