Specifications

20 How to Use the System Software Chapter 2
Example Testplans Example testplans to show how to use the actions are in the following
directory:
C:\Program Files\Agilent\TS-5400 System
Software\testplan\examples
Adding an Action to
a Testplan
Do the following:
1. Open Agilent TestExec SL using the procedure in “Selecting Agilent
TestExec SL” on page 17.
2. Either create a new or open an old testplan, using the procedure in
“Loading a Testplan” on page 17 or “Creating a Testplan” on page 18,
respectively.
3. If using a new testplan, do the procedure in Figure 2-2 on page 18 to
add a test. If using an old testplan, select the test into which you wish
to add an action and continue with step 4.
4. Add an action to the test, as shown in Figure 2-3 and Figure 2-4.
There are two different actions that can be added, a regular action and
a switching action. Figure 2-3 shows how to add a regular action and
Figure 2-4 shows how to add a switching action.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com