Specifications

104 Action Summary Chapter 5
ISO9141Write Writes unformatted data to the ISO9141 protocol.
J1850BlockTransfer Reads data from a file and sends the data along with header data to the J1850
device.
J1850GetConfig Gets information on the configuration and mode of operation of the J1850 serial
interface device.
J1850Read Reads unformatted J1850 data.
J1850SetConfig Sets information on the configuration and mode of operation of the J1850 serial
interface device.
J1850SetSourceAddr Sets the physical ID of the sender of the message.
J1850Write Writes unformatted J1850 data.
J1939Read Reads J1939 bus.
J1939Write Writes unformatted J1939 data.
mComClrRxBuff Clears the receive buffer of the associated serial protocol interface.
mComConfigGroup Sets information on the configuration and mode of operation of the group
message feature.
mComGetBoardInfo Returns results of Multicom serial interface board self test, board serial
number, board version number and firmware/hardware id numbers for
on-board functions & Physical Interface Module (PIM) slots.
mComMask Converts string to real number.
mComReset Resets the Multicom box.
mComSetBitRate Sets the bit rate of the associated serial protocol interface.
mComStartGroup
mComStopGroup Stops any group messages that were previously started by mComStartGroup.
Table 5-15. SerialProtocol (Automotive Serial Protocol) Actions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com