Specifications

102 Action Summary Chapter 5
psGetCurrent Reads and returns the output current of the Power Supply.
psGetStatus Reads and returns Power Supply error status from last "psSet" or "psIsSet"
Action.
psGetVoltage Reads and returns the output voltage of the Power Supply.
psIsSet Waits until the Power Supply is ready for output.
psProgVI Programs and outputs the voltage/current of the Power Supply.
psReset Resets the Power Supply to its power-on state.
psSelfTest Runs a selftest on the Agilent Power Supply specified.
psSet Sends configuration information to the Power Supply.
psSetReturnMode Sets sequencer behavior on Power Supply timeout errors.
psSetTimeout Sets Power Supply operation time out value (in milliseconds).
psSetVI Selects the voltage and current parameters of the power supplies.
psTrigger Send a software trigger to the Power Supply.
Table 5-12. serial Actions
Low-Level Actions
scommBreak Sends or clears a break signal.
scommFlush Flushes the specified port.
scommGetConfig Returns the current configuration of the given serial port.
scommReceive Reads the specified number of characters from the Serial Port and checks
those numbers against the "compareString" parameter.
scommReceiveBytes Reads the Serial Port.
scommReset Resets the Serial Port.
scommSend Sends data to the Serial Port.
scommSendBytes Sends user specified bytes of data to the Serial Port.
scommSet Sends current setup information to the Serial Port.
scommSpawnSendBytes Sends user specified bytes of data to the Serial Port.
scommStop Flushes the transmit buffer used for the Serial Port and resets the number
of bytes sent and received to 0.
scommTransmit Writes to and reads from the Serial Port the number of bytes requested.
scommTransmitBytes Writes to and reads from the Serial Port the number of bytes requested.
scommWaitForSendBytes Sends user specified bytes of data to the Serial Port.
Table 5-11. power (Power Supply) Actions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com