Specifications

Action Summary 99Chapter 5
Table 5-7. dio (Digital I/O) Actions
Low-Level Actions
ADDigitalRead Reads digital output data from the specified digital port on the Advantech
1750 PCI device.
ADDigitalWrite Writes digital output data to the specified digital port on the Advantech 1750
PCI device.
DigitalRead Reads a value from the TS-5430 digital input ports.
DigitalWrite Write a value to the TS-5430 digital output ports.
Spare Dig Read Reads a value from the digital input port of the Agilent E1330 Digital I/O
Module.
Spare Dig Write Sends a value to the digital output port of the Agilent E1330 Digital I/O
Module.
Table 5-8. event Actions
Low-Level Actions
eventConf Configures the Event Detector for a measurement.
eventInitiate Starts the previously configured Event Detector measurement.
eventIsSet Waits until the Event Detector is ready for operation.
eventReset Resets the Event Detector to its power-on state.
eventSet Sends current setup information to the Event Detector.
High-Level Actions
eventGetResults Returns stored data from the Event Detector.
eventMeasure Makes a measurement using the Event Detector and stores data into
memory.
Table 5-9. Generic Actions
Low-Level Actions
DialogOkay Display a message box with a prompt message and "Ok" button.
DialogOkayModal Display a message box with a prompt message and "Ok" button.
DialogYesNo Display a message in a dialog box; gives a Yes/No choice to continue in
two different ways.
DialogYesNoModal Display a message in a dialog box; gives a Yes/No choice to continue in
two different ways.
GetFixtureID Reads back the fixture I.
globalReset Call all reset routines of instruments listed in the hardware configuration
table.
msgDblIO This action sends a string from an Instrument and receives a double
response.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com