Specifications

8
Acquisition and analysis tools
provide rapid insight into your
toughest debug problems
When you want to understand what
your target is doing and why, you
need acquisition and analysis tools
that rapidly consolidate data and
provide insight into your system’s
behavior.
Optional analysis and automated measurement packages
B4655A FPGA Dynamic Probe (Xilinx), B4656A FPGA
Dynamic Probe (Altera)
Gain unprecedented visibility into your FPGA’s internal activity. Make
incremental real-time measurements in seconds without stopping the FPGA,
changing the design or modifying design timing. Quickly set up the logic
analyzer with automatic pin mapping and signal bus naming by leveraging
work you did in your design environment. www.agilent.com/find/fpga
89601B-300 digital vector signal analysis, hardware
connectivity for logic analyzers
Perform time-domain, spectrum, and modulation quality analysis on digital
Baseband and IF signals. www.agilent.com/find/dvsa
B4601C serial-to-parallel analysis package Eliminate the tedious, time-consuming, and error-prone task of sifting through
thousands of analysis package serial bits by looking at long vertical columns
of captured 1’s and 0’s. The B4601C serial-to-parallel analysis package is
general-purpose software that allows easy viewing and analysis of serial data.
B4602A signal extractor tool This tool processes input signals and based on xml algorithms and creates a
mapping of captured signals into new bus and signal names
B4606A advanced customization environment—
development and runtime package
Tailor your logic analyzer interface with a wide range of control, analysis
and display capabilities specific to your measurement application. Create
integrated dialogs, graphical displays and analysis functions to quickly
manipulate measurement data into a format that provides additional insight
and answers. www.agilent.com/find/logic-customview
B4607A advanced customization environment—
runtime package
Run the macros and graphical views created with a B4606A development
package or obtain and run a variety of commonly requested tools from Agilent
and its partners to help customize your measurement environment.
B4608A ASCII remote programming interface Remotely control a 16850-Series logic analysis system by issuing ASCII
commands. This interface is designed to be as similar as possible to the RPI
on the 16700 Series logic analysis system, so that you can reuse existing
programs. Requires either B4606A or B4607A to be enabled. You can also use
the B4606A to customize and add RPI commands.
B4610A data import package Use the logic analyzer GUI to view data obtained from tools other than a logic
analyzer.
B4630A MATLAB
®
connectivity and analysis package Make an easy connection to MATLAB and transfer your logic analyzer
measurement data for processing. Display the results on the logic analyzer in
an XY scattergram chart.
Figure 4. Perform in-depth time, frequency and modulation domain analysis on your
digital baseband and IF signals with Agilent’s 89600 Vector Signal Analysis software,
running on the logic analyzer.
Get Instant Insight into your Design with Multiple Views and Analysis Tools