User`s guide

70 Chapter 2

Installing the E5810

Installing and Configuring the Agilent IO Libraries

Do Not Delete the LAN Client Interface. When the VISA LAN Client is

configured, the LAN Client is also automatically configured in the

background. Thus, when VISA LAN Client configuration completes, two

configured interfaces are displayed on the IO Config main screen. See

the following figure for a typical display. Do NOT remove the LAN Client

or VISA LAN Client interface, as the application will not run if either

interface is removed

NOTE

After the system is configured, the

VISA LAN Client Interface (LAN to

ASRL)

screen may also display an Edit VISA Config... button.

Clicking this button allows you to manually configure the interface as

desired. This optional feature is generally not required for the E5810.

1. Change this value to the

Hostname

to the IP

Address shown on the

E5810 front panel display.

2. Make this name the same as

the RS-232 SICL Interface

Name displayed on the

E5810 Welcome Web page.

(The default is COM1.)