User`s guide

Chapter 2 69
Installing the E5810
Installing and Configuring the Agilent IO Libraries
2 When the main screen appears, highlight the ASRL VISA LAN Client
(e.g. E5810)
menu item and click the Configure button to display the
VISA LAN Client Interface (LAN to ASRL) screen.
3 From the
VISA LAN Client Interface (LAN to ASRL) screen appears, as
required, set the Remote Hostname or IP Address and Remote SICL
Interface Name as shown in the following figure. Then, click the
OK
button. See Chapter 3 - Using E5810 Web Access for information on
using the E5810
Welcome page.
NOTE
Since
ASRL VISA LAN Client (e.g. E5810) is not marked with an
* (this is not Autoconfigurable), you cannot use the *
Auto Config button
to automatically configure the interface. Instead, you must manually
configure the interface, as shown.
1. Highlight VISA
LAN Client
2. Click Configure
Cannot automatically configure
VISA LAN Client with the
*Auto
Config
button.