User`s guide

Chapter 2 67
Installing the E5810
Installing and Configuring the Agilent IO Libraries
3 From the VISA LAN Client Interface (LAN to GPIB) screen appears, as
required, set the Remote Hostname or IP Address and Remote SICL
Interface Name as shown in the following figure. Then, click the
OK
button. See Chapter 3 - Using E5810 Web Access for information on
using the E5810
Welcome page.
4
Do Not Delete the LAN Client Interface. When the VISA LAN Client is
configured, the LAN Client is also automatically configured in the
background. Thus, when VISA LAN Client configuration completes, two
configured interfaces are displayed on the IO Config main screen. See
the following figure for a typical display. Do NOT remove the LAN Client
or VISA LAN Client interface, as the application will not run if either
interface is removed.
NOTE
After the system is configured, the
VISA LAN Client Interface (LAN to GPIB)
screen may also display an Edit VISA Config... button. Clicking
this button allows you to manually configure the interface as desired.
This optional feature is generally not used for the E5810.
1. Change this value to the
Hostname OR to the IP
Address shown on the
E5810 front panel display.
2. Make this name the same
as the
GPIB SICL Interface
Name
displayed on the
E5810
Welcome Web page.
(The default is gpib0.)
The optional Edit VISA Config...
is typically not used for the E5810.