User`s guide

66 Chapter 2
Installing the E5810
Installing and Configuring the Agilent IO Libraries
Configuring VISA LAN Client (GPIB)
This section shows the steps to configure the interface for VISA LAN Client
operation for GPIB instruments. If you do not have GPIB instruments
connected to your system, but do have an RS-232 instrument connected,
skip this section and see “Configuring VISA LAN Client (RS-232)”.
1 Click the
Agilent IO Libraries Control icon (blue icon on the Windows
taskbar) and click Run I
O Config to display the IO Config utility
Main Screen.
2 When the main screen appears, highlight the
GPIB VISA LAN Client
(e.g. E5810)
menu item and click the Configure button to display the
VISA LAN Client Interface (LAN to GPIB) screen.
NOTE
Since
GPIB VISA LAN Client (e.g. E5810) is not marked with an
* (this is not Autoconfigurable), you cannot use the *
Auto Config button
to automatically configure the interface. Instead, you must manually
configure the interface, as shown.
1. Highlight GPIB
VISA LAN Client
2. Click Configure
Cannot automatically configure
VISA LAN Client with the
*Auto
Config
button.