User`s guide
60 Chapter 2
Installing the E5810
Installing and Configuring the Agilent IO Libraries
Installing and Configuring the Agilent IO
Libraries
This step gives guidelines to install a full L.01.01 version of the Agilent IO
on a PC with Windows 98/NT/2000/Me/XP Professional and to configure for
VISA LAN Client operation.
Steps to Install the Libraries
These steps show how to install the full Agilent IO Libraries in default
directories and should be acceptable for most applications. To install a
custom version of the libraries or to install the libraries in a non-default
directory, see Appendix B - Using the Agilent IO Libraries.
1 Check for Installed Agilent IO Libraries
Before you begin installation, check for previously installed Agilent IO
Libraries. If a version of the Agilent IO Libraries is installed on your PC,
a blue IO icon may be displayed on the Windows taskbar (on the lower
right-hand side of the screen).
If the IO icon is displayed, click the icon and click About Agilent
IO Libraries Control
to display the version. The version
must be L.01.01 or greater.
NOTE
If you only want to use your Web Browser to access the E5810,
skip this step.
NOTE
Each client PC used for VISA/SICL application development must have
a separate Agilent IO Libraries license. To order a separate Agilent IO
Libraries license, order Option AG6 or E2094L or greater.
Blue IO Icon