User`s guide

150 Appendix B
Using the Agilent IO Libraries
Installing Custom Agilent IO Libraries
 To Accept the Settings. Click Next>. Setup will then install the
files and display the
Agilent IO Libraries have been successfully
installed
screen (see Step 13).
 To Change the VISA Installation Path. Click <Back on the
Current Settings screen and <Back on the Select Type of
Installation
screen to display the VISA Installation Directory
screen. Change the path as desired and then click
Next>.
 To Change the SICL Installation Path. Click <Back on the
Current Settings screen and <Back on the Select Type of
Installation
screen to display the VISA Installation Directory
screen. Then, click <
Back on the VISA Installation Directory
screen to display the
SICL Installation Directory screen.
Change the path as desired and then click
Next>.
 To Change the IO Libraries Components to be installed. Click
<
Back to re-display the Select Individual Components screen.
Change the components to be installed and then click
Next>.
13 As the last step in the Agilent IO Libraries installation, the
Agilent IO
Libraries have been successfully installed
screen appears. For E5810
installation, check the
Run IO Config box if the E5810 has been
configured on the network. (If desired, you can check the
View
Readme
box.)