User`s guide

142 Appendix B
Using the Agilent IO Libraries
Using the Agilent IO Libraries CD
Using the Agilent IO Libraries CD
The Agilent IO Libraries for Instrument Control CD that shipped with your
E5810 includes all the information that is installed on your PC when you
install the Agilent IO Libraries.
Introduction If you have not yet installed the libraries, but need a description of the
libraries or are interested in troubleshooting information, you can access this
information by copying applicable files to your PC. This section shows how
to copy the Agilent IO Libraries Installation and Configuration Guide for
Windows
Copying the
Installation Guide
File
The Agilent IO Libraries Installation and Configuration Guide for Windows
contains a full description of the Agilent IO Libraries and shows detailed
installation and configuration steps. A .pdf version of the manual is on the
Agilent IO Library for Instrument Control CD that shipped with your E5810.
(Adobe Acrobat® Reader is required to view the .pdf file.)
As desired, you can copy the file to a directory of your choice so you can
refer to the guide as you do the installation procedure. If you do not want to
copy the file now, the guide will be available as part of the IO Libraries after
installation is complete. To copy the installation guide file to your directory:
1 Turn the PC ON, insert the Agilent IO Libraries for Instrument Control
CD into the CD-ROM drive, and wait a few seconds for the application
to run.
2 The installer should automatically start when the CD is inserted.
If not, select
Start | Run and browse to and select Setup.exe
on your CD-ROM. Click
Open to run the application. The InstallShield
Wizard appears to begin the Agilent IO Libraries installation.
Immediately click the Cancel button to stop the installation.
3 Open your Windows Explorer and navigate to <drive> | Manuals
| install.pdf.
4 Copy install.pdf to a directory on your PC.
5 Remove the Agilent IO Libraries for Instrument Control CD from the
CD-ROM.