User`s guide

138 Appendix B
Using the Agilent IO Libraries
This appendix describes the Agilent IO Libraries and gives guidelines to
install full and custom versions of the libraries, including:
 Agilent IO Libraries Description
 Using the Agilent IO Libraries CD
 Installing Custom Agilent IO Libraries
NOTE
If your host PC will only be used to configure the E5810 using the E5810
Web Access, you do not need to install the Agilent IO Libraries.
NOTE
All Agilent IO Library information in this guide refers to Agilent IO
Libraries version L.01.01. For Agilent IO Library information with later
versions of the Agilent IO Libraries, see the Agilent IO Libraries
Installation and Configuration Guide for Windows.
Before you install the libraries, you can copy an electronic version of this
guide from the Agilent IO Libraries for Instrument Control CD that shipped
with your E5810. See “Using the Agilent IO Libraries CD” in this appendix
for details.
After the libraries are installed, you can access the guide by clicking
the blue IO icon on the Windows taskbar and then clicking
View Documentation | IO Libraries Installation Guide.