User`s guide

E5810B LAN/GPIB/USB Gateway
Installing the E5810B
6 E5810B Quick Start Guide
Network information
Before connecting the E5810B to an Enterprise network,
obtain the E5810B serial number and Ethernet (MAC) address
printed on a label at the bottom panel of the E5810B. Fill up the
information in the E5810B LAN/GPIB/USB Gateway
Information as shown below.
Provide this information to your system administrator and
request for the Enterprise network information as
shown below.
E5810B LAN/GPIB/USB Gateway Information
Serial number: ____________________________
Ethernet (MAC) address: ____________________________
Default values
(for system administrator)
DHCP: Enabled at power-on
Hostname: No hostname configured
Enterprise Network Information
Does the network support DHCP? Yes ____ No ____
If No, provide – IP address (static): _____._____._____._____
Subnet mask: _____._____._____._____
Gateway IP address: _____._____._____._____
Does the network support DNS? Yes ____ No ____
If Yes, provide – E5810B hostname: _____________________
DNS server (IP address) _____._____._____._____
NOTE
If the Enterprise network does not support DHCP, refer to
“Configure the E5810B using a local network" on page 10 to
configure the E5810B using a local network.