User`s guide

E5810B LAN/GPIB/USB Gateway

Configuring Instruments via IO Libraries Suite

14 E5810B Quick Start Guide

Configure a remote USB interface

1 Launch Keysight Connection Expert from the Start menu or

the Start Screen (Windows 8).

2 Select Add Interface > Remote USB to display the Remote

USB Interface dialog box.

Locate the E5810B on the local subnet.

Insert the hostname or the IP address shown on the E5810B

display to locate the E5810B if it is not located in the same subnet.

The interface name must be similar to the name shown in the USB

SICL Interface Name at the E5810B Welcome page.

Verify the connectivity and configuration. A message will be

displayed on the dialog box once the connection to the interface is

established and verified.