User`s guide

E5810B LAN/GPIB/USB Gateway
Configuring the E5810B
E5810B Quick Start Guide 11
1 Select View & Modify Configuration from the E5810B
Welcome page to display the E5810B current configuration.
2 Select Modify Configuration and enter the password to
configure the E5810B. The default password is E5810.
3 Set the DHCP setting to OFF, and update the IP Address,
Subnet Mask, and Default Gateway with the parameters
provided by your system administrator in “Network
information" on page 6.
4 If you are using Domain Name Server (DNS), enter the DNS
IP address and hostname provided by your system
administrator.
5 Select Save and then select Reboot E5810B to save
the configuration.
6 Disconnect the E5810B from the local network and connect
the E5810B to the Enterprise network.