User`s guide

E5810B LAN/GPIB/USB Gateway
Configuring the E5810B
10 E5810B Quick Start Guide
Configure the E5810B using a local network
If the Enterprise network does not support DHCP, the E5810B
will use the default static IP address (169.254.58.10) when
connected to the Enterprise network. This IP address may not
be available on the Enterprise network.
For correct operation on a non-DHCP Enterprise network, you
must first use a local network to configure the E5810B. There
are two typical local network configurations as shown below.
1
9
5
6
1
13
GPIB
RS232
+12 VDC
2.0A
LAN
ICES/NMB-001
ISM GRP 1-A
N10149
KCC-REM-ATi-
WCIOP
1
9
5
6
1
13
GPIB
RS232
+12 VDC
2.0A
LAN
ICES/NMB-001
ISM GRP 1-A
N10149
KCC-REM-ATi-
WCIOP
E5810B
Switch/hub
To a PC
Local Network Using a Switch or Hub
Local Network Using a Crossover Cable
E5810B
To a P C
LAN crossover cable