User`s guide

E5810B User’s Guide 79
E5810B Web Access 3
Other Web Access Functions
• Firmware File: Enter the filename of the E5810B
firmware. The default filename is
e5810_B_latest_firmware.hex. You may also need
to add the appropriate directory information to locate
the file on the FTP server.
8 Perform firmware update.
i Select Update Firmware to display the password dialog
box. Select OK to confirm the update and the E5810B
will attempt to download the firmware from the
FTP site.
ii After you have confirmed the update, the E5810B front
panel should display the Updating firmware… message.
iii The LAN LED should flash, indicating LAN activity is
taking place. The firmware for the E5810B is
approximately 12 MB and downloading time may vary,
depending on network connections.
iv After the firmware image has been downloaded into
the E5810B, the E5810B will automatically reboot and
display the Rebooting E5810B... message. The E5810B will
then begin a normal startup sequence.
9 Verify the firmware revision.
When the E5810B is successfully rebooted, verify that the
firmware has been downloaded successfully by displaying
the E5810B Welcome page and verify that the firmware
revision number shows the correct version of the
firmware.