User`s guide

E5810B User’s Guide 77
E5810B Web Access 3
Other Web Access Functions
5 Verify that the E5810B is idle.
Updating the E5810B is a significant activity. Ensure that
no other users or programs are using the E5810B before
you attempt to update the firmware. You can check the
number of open sessions by displaying the E5810B
LAN/GPIB/USB Gateway Status page. To open this page,
select the Session Status tab on the Navigation Bar. It is
recommended that you reboot the E5810B before
performing the firmware update process.
6 Open the Updating Firmware page.
i Select Updating the E5810B Firmware in the E5810B Web
Access Help Table of Contents to display the Updating
your Firmware page.
ii Select the Update the E5810B firmware hyperlink on this
page. You will be prompted for a password before the
Update Firmware on your E5810B LAN/GPIB/USB
Gateway dialog box is displayed as shown in
Figure 3- 16.
Figure 3-16 E5810B LAN/GPIB/USB Gateway dialog box
iii Select FTP as the firmware update method and select
Proceed to display the page as shown in
Figure 3- 17.