User`s guide

E5810B User’s Guide 75

E5810B Web Access 3

Other Web Access Functions

3 Check that all the default parameters are correct.

• Firmware FTP server Hostname or IP Address: ftp.keysight.com

• User Login: Enter the login name for the FTP server.

• Password: Enter the password associated with the

• Firmware File:

/pub/e5810/e5810b/e5810_B_latest_firmware.hex

4 Perform firmware update.

i Select Update Firmware to display the password dialog

box. Select OK to confirm the update and the E5810B

will attempt to download the firmware from the

FTP site.

ii After you have confirmed the update, the E5810B front

panel should display the Updating firmware… message.

iii The LAN LED should flash, indicating LAN activity is

taking place. The firmware for the E5810B is

approximately 12 MB and downloading time may vary,

depending on network connections.

iv After the firmware image has been downloaded into

the E5810B, the E5810B will automatically reboot and

display the Rebooting E5810B... message. The E5810B will

then begin a normal startup sequence.

5 Verify the firmware revision.

When the E5810B is successfully rebooted, verify that the

firmware has been downloaded successfully by displaying

the E5810B Welcome page and verify that the firmware

revision number shows the correct version of the

firmware.

NOTE

You can also directly access the Updating Firmware page on your E5810B

LAN/GPIB/USB Gateway page at

http://<IP_Address>/dynamicWebFile/firmware_update_login.php,

where <IP_Address> is the IP address displayed on the front panel

display of the E5810B.