User`s guide

3 E5810B Web Access
Other Web Access Functions
70 E5810B User’s Guide
Updating the E5810B firmware via a connected USB drive
1 Acquire an image of the E5810B firmware.
Obtain the image from your Web browser. You may need
to set up an FTP proxy on your Web browser.
i On your Web browser, type
ftp://ftp.keysight.com/pub/e5810/e5810b/ to connect you
to the Keysight FTP server or type
http://www.keysight.com/main/software.jspx?ckey=24266
53&lc=eng&cc=MY&nid=- 34195.1051168&id=2426653 to
display the E5810B LAN/GPIB/USB Gateway Firmware
Web page. This page displays the files associated with
the E5810B.
ii Select the file e5810_B_latest_firmware.hex or click the
download button respectively and save it to the USB
drive. For example, in the Internet Explorer, right- click
the file and select Copy to Folder. Other Web browsers
may have a different sequence.
2 Verify that the E5810B is idle.
Updating the E5810B is a significant activity. Ensure that
no other users or programs are using the E5810B before
you attempt to update the firmware. You can check the
number of open sessions by displaying the E5810B
LAN/GPIB/USB Gateway Status page. To open this page,
select the Session Status tab on the Navigation Bar. It is
recommended that you reboot the E5810B before
performing the firmware update process.
NOTE
• Alternatively, you can directly FTP to the Keysight FTP server at
ftp.keysight.com using the anonymous FTP, supplying the user login,
and downloading the file at
/pub/e5810/e5810b/e5810_B_latest_firmware.hex.
• The E5810B supports the USB drive formatted in the FAT32 or XFAT32
format only.