User`s guide

E5810B User’s Guide 39
Installing the E5810B 2
Installing and Configuring Keysight IO Libraries Suite
Verifying communication from the PC
After you have configured the remote interface instruments,
verify the communication between the PC and the remote
interface instruments by using Keysight Interactive IO.
1 Launch Keysight Connection Expert from the Start menu or
the Start Screen (Windows 8).
2 Right- click on the remote interface instrument and select
Send Commands To This Instrument to display the Keysight
Interactive IO dialog box.
3 Use the default command, *IDN? and select Send & Read to
query the connected instrument.
4 The remote interface instrument identification information
will appear on the Instrument Session History as shown in
Figure 2- 13.
5 To send other commands, select Commands> to select from
a list of common commands, or type a command into the
Command: line.
Figure 2-13 Keysight Interactive IO
NOTE
You can also verify the communication between the PC and the remote
interface instruments using the E5810B Web access as shown in
“Verifying Instrument Communication” on page 31.