User`s guide

2 Installing the E5810B
Getting Network Information
22 E5810B User’s Guide
Getting Network Information
Local network information
Before you connect the E5810B to a local network, you will
need the required network information, such as the
IP addresses. You do not need to obtain any system
information from the system administrator in your
IT department.
Enterprise network information
Before you connect the E5810B to an Enterprise network,
you will need to get some network configuration and
network addressing parameters from the system
administrator in your IT department.
Before contacting the system administrator, obtain the
E5810B serial number and Ethernet (MAC) address printed
on a label at the bottom panel of the E5810B. Fill up the
information in the E5810B LAN/GPIB/USB Gateway Information as
shown in
Figure 2- 2.
After you have filled up the information, provide this
information to your system administrator and request for the
Enterprise network information as shown in
Figure 2- 3.