User`s guide

E5810B Description 1
E5810B Software/Firmware Descriptions
E5810B User’s Guide 17
To display the E5810B Welcome page, go to your Web
browser and type http://<hostname> (if known) or
http://<IP address> at the address line.
You can use the Web access to configure the E5810B and to
communicate with the GPIB, USB, and RS- 232 instruments.
For example, from the Configuring your E5810B
LAN/GPIB/USB Gateway page of the E5810B interface, you
can view and modify the configuration of the E5810B. You
can also communicate with the installed GPIB, USB, and
RS- 232 instruments using the Find and Control Instruments
Connected to your E5810B page. Refer to
Chapter 3,
“E5810B Web Access” for more information on the E5810B
Web access.
Figure 1-9 E5810B Welcome page