User`s guide

A Using the Telnet Utility
Telnet commands for E5810B
116 E5810B User’s Guide
gpib-address <0-30> View/Set the GPIB System Controller Address
gpib-unit <2-255> View/Set the GPIB Logical Unit Number
rs232-name <string*15> View/Set the RS-232 SICL Interface Name
rs232-baud
<300|1200|2400|4800|9600|19200|384
00|57600|115200>
View/Set Baud
rs232-bits <5|6|7|8> View/Set number of RS-232 data Bits
rs232-stopbits <1|2> View/Set number of RS-232 Stop Bits
rs232-parity
<NONE|EVEN|ODD|MARK|SPACE>
View/Set the RS-232 Parity
rs232-flow <NONE|XON|RTS|DTR> View/Set the RS-232 Flow Control
rs232-srq <RI|DSR|DCD|CTS> View/Set the RS-232 SRQ Line
usb-name <string*15> View/Set the USB SICL Interface name
status View the LAN/GPIB Gateway Connection Status
syslog-display View Contents of the Syslog
syslog-clear Clear the Syslog
password Enter the password (when prompted)
(Password is required when making changes)
changepassword Change the Password (when prompted)
restart Save Configuration and Reboot E5810B
factory-reset Reset Config to Factory Defaults and Reboot
exit Exit WITHOUT Saving Configuration (see restart)
quit Exit WITHOUT Saving Configuration (see restart)
bye Exit WITHOUT Saving Configuration (see restart)
Tab le A-1 Telnet commands (continued)
Command Description